Double-Decking Beam System

What you will find here

This section lists 5 double-decking beam system. Prices currently range from $4.99 to $4,710.99 in US dollars, and every product page shows the complete table of sizes and options so you can compare without clicking through each listing.

Common uses

Buyers use double-decking beam system for flatbed, step deck and van load securement, owner-operators building a DOT-compliant kit and replacing worn or out-of-service tie-downs. Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.

How to choose double-decking beam system

Measure the width or height you need to span and check the bar’s adjustment range and rating.

Three steps to the right choice

1. Check the working load limit. Use the WLL printed on the tag, not the break strength, when planning securement.
2. Pick the right end fitting. Flat hooks suit flatbed rub rails, wire hooks and snap hooks suit D-rings, and e-track fittings suit vans.
3. Protect the strap. Use edge protectors wherever webbing crosses a sharp edge.

Materials compared

• Aluminum (2 products) — Aluminum is light and corrosion-resistant, which makes it easy to handle and install.
• Steel and Aluminum (1 product) — Steel offers high strength and abrasion resistance; check the finish for rust protection.

Before you buy

• Confirm the size or option matches your equipment.
• Check the rated capacity against your heaviest load.
• Compare the full option table above before clicking through.

Price guide

Starting prices in this section break down as follows: 2 products under $25; 1 product $25 to $100; 1 product $100 to $500; 1 product over $500. 4 of 5 products currently have at least one option in stock at the retailer. Larger sizes, higher ratings and multi-packs cost more, so open the option table on each product to see exactly how the price changes.

Safety and care

• Seat both ends fully before loading.
• Check bars after the first miles of a trip.
• Replace bent or damaged bars.

Reading the option tables

Every product page in this section has a full table of options. Each row is one size, length, fitting or pack quantity you can order, with its own US dollar price and stock status. Use the table to compare prices across sizes before you click through — the cheapest listing price is often for the smallest size or single pack, so check the row that matches what you actually need.

Products to compare

• Tool Holder for E-Track and X-Track Systems — from $4.99
• 41.2 Inch Heavy-Duty Double Decking Shoring Beam System Wrench for Trailers — from $12.99; Steel and Aluminum
• Heavy-Duty 6 ft. Double Decking Sliding Track — from $25.99; Aluminum
• 97 Inch -107 Inch Double Decking Shoring Kaptive Beam for 102 Inch Trailers 2200 LB WLL — from $106.29; Aluminum
• 97″ Heavy Duty Double Decking Shoring Beam Sliding Track System – Extends Upto 102″ — from $739.99

Buying through Global Cargo Control

We are a catalogue and buying guide. Each product links to the retailer that sells and ships it; you choose your exact option and check out on their site. Prices are checked weekly, and the price at the retailer’s checkout is final.

Terms explained

• Working load limit (WLL) — the maximum load the item is rated to carry in service. Plan every load with this number.
• Breaking strength — the load at which the item failed in testing. It is not a working rating.
• Safety factor — the ratio of breaking strength to working load limit, such as 3:1 or 5:1.
• Grade — for chain and hardware, the strength class. Grade 70 is the transport standard; Grade 80 and 100 alloy is used for lifting.
• End fitting — the hook, ring or fitting at each end. It must match your anchor points.
• Kit or multi-pack — several matched pieces sold together, usually for less than buying each part separately.