Kinedyne Straps

What you will find here

This section lists 7 kinedyne straps. Prices currently range from $15.99 to $7,215.99 in US dollars, and every product page shows the complete table of sizes and options so you can compare without clicking through each listing.

Common uses

Buyers use kinedyne straps for flatbed, step deck and van load securement, owner-operators building a DOT-compliant kit and replacing worn or out-of-service tie-downs. Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.

How to choose kinedyne straps

Pick the width and rating first: add up the WLL of every strap so the total is at least half the cargo weight, then choose an end fitting that matches your anchor points. Use edge protectors where webbing crosses sharp corners.

Working load limits in this section run from 3,333 lbs to 6,670 lbs. Use the working load limit — never the breaking strength — when you plan a load.

Three steps to the right choice

1. Check the working load limit. Use the WLL printed on the tag, not the break strength, when planning securement.
2. Pick the right end fitting. Flat hooks suit flatbed rub rails, wire hooks and snap hooks suit D-rings, and e-track fittings suit vans.
3. Protect the strap. Use edge protectors wherever webbing crosses a sharp edge.

Materials compared

• Polyester (1 product) — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.

Specifications to compare

• Working load limit (WLL) — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
• End fitting — the hardware at the end of the strap or chain. Match it to your anchor points — flat hooks for flatbed rub rails, wire or snap hooks for D-rings, grab hooks for chain, E-track fittings for E-track.
• Strap width — wider webbing generally carries a higher rating and spreads pressure over more of the load.
• Length — make sure the strap reaches over the load and back to the anchor with enough tail to tension properly.
• Breaking strength — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.

Before you buy

• Add up the working load limits of all tie-downs against the cargo weight.
• Check that the end fitting matches the anchor points on your trailer.
• Make sure the length reaches over the load with tail left to tension.

Price guide

Starting prices in this section break down as follows: 4 products under $25; 3 products $25 to $100. 7 of 7 products currently have at least one option in stock at the retailer. Larger sizes, higher ratings and multi-packs cost more, so open the option table on each product to see exactly how the price changes.

Safety and care

• Inspect webbing before each use and retire straps with cuts, burns, melted fibres or damaged hardware.
• Keep the ratchet handle closed and locked after tensioning, and re-check tension at your first stop.
• Never exceed the working load limit printed on the tag.

Brands in this section

Kinedyne (3).

Reading the option tables

Every product page in this section has a full table of options. Each row is one size, length, fitting or pack quantity you can order, with its own US dollar price and stock status. Use the table to compare prices across sizes before you click through — the cheapest listing price is often for the smallest size or single pack, so check the row that matches what you actually need.

Products to compare

• 4″ Kinedyne Winch Strap w/ Flat Hook – Wide Polyester Webbing, 5,400 lbs WLL — from $15.99; Working Load Limit (WLL): 5,400 lbs
• Kinedyne 2″ x 30′ Yellow Ratchet Strap w/ Wire Hook — from $19.39; Working Load Limit (WLL): 3,335 lbs
• Kinedyne K Force Winch Straps 6670 WLL — from $23.49; Working Load Limit (WLL): 6,670 lbs
• 2″ Kinedyne Ratchet Tie-Down Strap with Flat Hook & Long Wide Handle – 10,000 lbs BS — from $24.19; Working Load Limit (WLL): 3,333 lbs
• 4″ x 30′ Kinedyne Rhino Max Abrasion Webbing Winch Strap with Flat Hook, Gray, 4630D3 — from $29.99; Working Load Limit (WLL): 6,670 lbs
• 2” x 30’ Kinedyne K Force Ratchet Straps 4000 WLL — from $33.49; Working Load Limit (WLL): 4,000 lbs
• Kinedyne 4 in. x 30 ft. Winch Strap with Chain Anchor — from $39.99; Working Load Limit (WLL): 5,400 lbs

Buying through Global Cargo Control

We are a catalogue and buying guide. Each product links to the retailer that sells and ships it; you choose your exact option and check out on their site. Prices are checked weekly, and the price at the retailer’s checkout is final.