If you need gear for flatbed, step deck and van load securement, this g80 / g100 / g120 chain is worth a look: end fitting Grab Hook and chain grade G80. It is offered in 9 options by size. Current prices run from $31.49 to $173.49.
Key specifications
- Weight (Lbs): 16.00
- End Fitting: Grab Hook
- Chain Grade: G80
- Color: Black-Red
Best for
- Flatbed, step deck and van load securement
- Owner-operators building a DOT-compliant kit
- Replacing worn or out-of-service tie-downs
Tip
Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Typical uses
- Flatbed, step deck and van load securement
- Owner-operators building a DOT-compliant kit
- Replacing worn or out-of-service tie-downs
Options available
- Size: 5/16″ x 10′, 4000 lbs WLL, 5/16″ x 16′, 4000 lbs WLL, 5/16″ x 20′, 4000 lbs WLL, 3/8″ x 16′ G80, 7100 lbs WLL, 3/8″ x 10′ G80, 7100 lbs WLL, 3/8″ x 20′ G80, 7100 lbs WLL, 1/2″ x 10′ G80, 12,000 lbs WLL, 1/2″ x 16′ G80, 12,000 lbs WLL and 1 more
There are 9 option combinations, priced from $31.49 to $173.49. The full table above lists every combination and its price.
How to choose the right g80 / g100 / g120 chain
Choose the grade and size by the working load limit you need. Grade 70 is the transport standard; higher grades carry more for the same size. Make sure the hooks match your binders and anchor points.
Specifications explained
- End fitting: Grab Hook — the hardware at the end of the strap or chain. Match it to your anchor points — flat hooks for flatbed rub rails, wire or snap hooks for D-rings, grab hooks for chain, E-track fittings for E-track.
- Chain grade: G80 — the strength class of the chain. Grade 70 is the standard for cargo securement; Grade 80, 100 and 120 alloy chains are stronger for their size and are the grades used for overhead lifting.
Before you buy
- Match chain size and grade to the binders and hooks you already use.
- Confirm the working load limit covers your share of the cargo weight.
- Measure the length needed to reach anchor points on both sides.
Safety and care
- Never knot a chain or use a chain with stretched, bent or cracked links.
- Use edge protection where chain crosses finished or sharp edges.
- Only use alloy (Grade 80/100) chain for overhead lifting.
To complete your setup, many buyers also look at ratchet chain binders, chain hooks and corner & edge protectors — see the suggestions below.
