A dependable choice for pulling, positioning and load handling, this product sits in our slings kits section and lists style Chain Connector, sizes 1/2″ – G80 and load limit 12,000 lbs. The current price is $111.49.
Key specifications
- Weight (Lbs): 10.60
- Style: Chain Connector
- Sizes: 1/2″ – G80
- Load Limit: 12,000 lbs
Best for
- Crane, hoist and rigging work
- Construction, industrial and shop rigging
- Pulling, positioning and load handling
Tip
Never exceed the rated working load limit for your hitch type and sling angle, and inspect gear before every lift.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Typical uses
- Crane, hoist and rigging work
- Construction, industrial and shop rigging
- Pulling, positioning and load handling
How to choose the right slings kit
Start with the load weight, then choose a sling whose rated capacity for your hitch (vertical, choker or basket) exceeds it. Allow for sling angle and pick a length that keeps the angle above 60° where possible.
Specifications explained
- Working load limit (WLL): 12,000 lbs — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
Before you buy
- Know the load weight and the hitch you will use.
- Check the rated capacity for that hitch and the sling angle.
- Confirm fittings and pin sizes are compatible with your rigging.
Safety and care
- Inspect slings before every lift; remove any with cuts, burns, broken stitching or a missing tag.
- Protect slings from sharp edges with wear pads or corner protectors.
- Never stand under a suspended load.
To complete your setup, many buyers also look at shackles, crosby® lifting hooks and corner & edge protectors — see the suggestions below.
