This item from our Crosby® Shackles range is built for crane, hoist and rigging work, with working load limit wll 6.5 Ton, breaking strength bs 39 Ton and sizes 7/8 inch. The current price is $107.99.
Key specifications
- Weight (Lbs): 3.87
- Working Load Limit (WLL): 6.5 Ton
- Breaking Strength (BS): 39 Ton
- Sizes: 7/8 inch
- Type: Bolt-Type Anchor Shackle
- Throat Opening: 1.44 inch
- Pin Diameter: 1.02 inch
- Safety Factor: 6:1
Best for
- Crane, hoist and rigging work
- Construction, industrial and shop rigging
- Pulling, positioning and load handling
Tip
Never exceed the rated working load limit for your hitch type and sling angle, and inspect gear before every lift.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Typical uses
- Crane, hoist and rigging work
- Construction, industrial and shop rigging
- Pulling, positioning and load handling
How to choose the right crosby® shackle
Pick the shackle by working load limit and pin size. Anchor (bow) shackles handle multi-leg loads; chain (D) shackles suit in-line pulls. Screw-pin types are for temporary rigging; bolt-type for long-term or rotating loads.
Specifications explained
- Working load limit (WLL): 6.5 Ton — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
- Breaking strength: 39 Ton — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
- Throat opening: 1.44 inch — the gap at the mouth of a hook, which determines what fittings and rigging fit into it.
- Pin diameter: 1.02 inch — the size of the shackle pin; it must fit the eye or hardware you are connecting to.
- Safety factor: 6:1 — the ratio between breaking strength and working load limit (for example 3:1 or 5:1). A higher factor means more margin for shock loading and wear.
- Surface finish: Galvanized — the coating that protects the metal. Galvanized and zinc finishes resist rust; powder coat adds a tough painted layer.
- Material: Carbon Steel — Steel offers high strength and abrasion resistance; check the finish for rust protection.
Before you buy
- Know the load weight and the hitch you will use.
- Check the rated capacity for that hitch and the sling angle.
- Confirm fittings and pin sizes are compatible with your rigging.
Safety and care
- Load shackles in line with the pin and body, never side-loaded beyond the maker’s rating.
- Fully seat the pin and use a cotter or nut on bolt types.
- Replace shackles that are bent, cracked or worn.
To complete your setup, many buyers also look at slings, chain slings and crosby® lifting hooks — see the suggestions below.
