E-Track Accessories

What you will find here

This section lists 33 e-track accessories. Prices currently range from $2.69 to $334.49 in US dollars, and every product page shows the complete table of sizes and options so you can compare without clicking through each listing.

Common uses

Buyers use e-track accessories for flatbed, step deck and van load securement, owner-operators building a DOT-compliant kit and replacing worn or out-of-service tie-downs. Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.

How to choose e-track accessories

Confirm the track type (E-track, L-track or X-track) on your trailer and choose matching fittings, straps or beams.

Working load limits in this section run from 22 lbs to 1,335 lbs. Use the working load limit — never the breaking strength — when you plan a load.

Three steps to the right choice

1. Check the working load limit. Use the WLL printed on the tag, not the break strength, when planning securement.
2. Pick the right end fitting. Flat hooks suit flatbed rub rails, wire hooks and snap hooks suit D-rings, and e-track fittings suit vans.
3. Protect the strap. Use edge protectors wherever webbing crosses a sharp edge.

Materials compared

• Steel (13 products) — Steel offers high strength and abrasion resistance; check the finish for rust protection.
• Polyester Webbing (4 products) — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.
• Polyester (2 products) — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.
• Grade 50 Structural Steel (1 product) — Steel offers high strength and abrasion resistance; check the finish for rust protection.
• 900D Premium Polyester Oxford Fabric (1 product) — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.

Specifications to compare

• Surface finish — the coating that protects the metal. Galvanized and zinc finishes resist rust; powder coat adds a tough painted layer.
• Working load limit (WLL) — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
• Capacity — the rated load for this item in the use it is designed for.
• End fitting — the hardware at the end of the strap or chain. Match it to your anchor points — flat hooks for flatbed rub rails, wire or snap hooks for D-rings, grab hooks for chain, E-track fittings for E-track.
• Breaking strength — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
• Thickness — thicker material resists abrasion and cutting better but adds weight.

Before you buy

• Add up the working load limits of all tie-downs against the cargo weight.
• Check that the end fitting matches the anchor points on your trailer.
• Make sure the length reaches over the load with tail left to tension.

Price guide

Starting prices in this section break down as follows: 25 products under $25; 6 products $25 to $100; 2 products $100 to $500. 33 of 33 products currently have at least one option in stock at the retailer. Larger sizes, higher ratings and multi-packs cost more, so open the option table on each product to see exactly how the price changes.

Safety and care

• Fully engage spring fittings in the track slots.
• Keep tracks clean so fittings lock properly.
• Use enough anchor points to meet the cargo weight.

Products to compare

• 6″ Rope Tie Offs With D Ring & E-Track Spring Fitting – 1,000 Lbs WLL — from $2.69; Working Load Limit (WLL): 1,000 lbs
• E-Track Mini Cargo Tie-Down Plate — from $2.99; Capacity: 2,400 lbs
• E-Track Sleeve for Logistics Bar — from $5.99; 4″ (L) x 3-3/4″ (W) x 4-1/2″ (H)
• E-track 5-gallon bucket holder — from $11.29; Working Load Limit (WLL): 110 lbs
• E-Track Storage Bag With Spring Fittings, Hold Upto 50 Lbs — from $16.49; 14″
• E-Track Backing Plate w/ Hardware for Enclosed Trailer, Truck, & Workshop – 6″ x 6-1/2″, Set of 4 Pcs — from $17.99; Steel
• 1 Pair of E-Track Fixed Shelf Track Brackets for Enclosed Trailer Shelves — from $20.99; Capacity: 110 lbs (2 Pieces Assembly)
• Motorcycle E-Track Tie Down Kit with Ratchet Strap, O-Ring Fitting & Wheel Chock — from $83.49; Steel

Buying through Global Cargo Control

We are a catalogue and buying guide. Each product links to the retailer that sells and ships it; you choose your exact option and check out on their site. Prices are checked weekly, and the price at the retailer’s checkout is final.