If you need gear for flatbed, step deck and van load securement, this 2″ ratchet strap is worth a look: hook type Flat Hook, end fitting Flat Hook and breaking strength bs 10,000 lbs. It is offered in 10 options by size. Current prices run from $9.49 to $15.79.
Key specifications
- Weight (Lbs): 5.00
- Hook Type: Flat Hook
- End Fitting: Flat Hook
- Breaking Strength (BS): 10,000 lbs
- Material: Polyester
- Strap Width: 2 Inch
- Fixed End Length: 1 Ft
Best for
- Flatbed, step deck and van load securement
- Owner-operators building a DOT-compliant kit
- Replacing worn or out-of-service tie-downs
Tip
Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Options available
- Size: 2″ x 20′ – Yellow, 2″ x 27′ – Yellow, 2″ x 30′ – Yellow, 2″ x 30′ – Blue, 2″ x 30′ – Red, 2″ x 30′ – Green, 2″ x 30′ – Black, 2″ x 30′ – Custom Color and 2 more
There are 10 option combinations, priced from $9.49 to $15.79. The full table above lists every combination and its price.
How to choose the right 2″ ratchet strap
Pick the width and rating first: add up the WLL of every strap so the total is at least half the cargo weight, then choose an end fitting that matches your anchor points. Use edge protectors where webbing crosses sharp corners.
Specifications explained
- End fitting: Flat Hook — the hardware at the end of the strap or chain. Match it to your anchor points — flat hooks for flatbed rub rails, wire or snap hooks for D-rings, grab hooks for chain, E-track fittings for E-track.
- Breaking strength: 10,000 lbs — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
- Strap width: 2 Inch — wider webbing generally carries a higher rating and spreads pressure over more of the load.
- Length: 1 Ft — make sure the strap reaches over the load and back to the anchor with enough tail to tension properly.
- Material: Polyester — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.
Safety and care
- Inspect webbing before each use and retire straps with cuts, burns, melted fibres or damaged hardware.
- Keep the ratchet handle closed and locked after tensioning, and re-check tension at your first stop.
- Never exceed the working load limit printed on the tag.
To complete your setup, many buyers also look at corner & edge protectors and e-track accessories — see the suggestions below.
