This item from our 4″ Ratchet Straps range is built for flatbed, step deck and van load securement, with size 4″ x 30′ – Orange (High Abrasion), working load limit wll 6,670 lbs and breaking strength bs 20,000 lbs. The current price is $46.99.
Key specifications
- Weight (Lbs): 20.25
- Size: 4″ x 30′ – Orange (High Abrasion)
- Working Load Limit (WLL): 6,670 lbs
- Breaking Strength (BS): 20,000 lbs
- End Fitting: Chain Extention
- Bundle Size: 1 – Pack
- Color: Orange
- Material: Polyester
Best for
- Flatbed, step deck and van load securement
- Owner-operators building a DOT-compliant kit
- Replacing worn or out-of-service tie-downs
Tip
Add up the working load limit of every tie-down: under FMCSA rules the total must be at least half the weight of the cargo.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
How to choose the right 4″ ratchet strap
Pick the width and rating first: add up the WLL of every strap so the total is at least half the cargo weight, then choose an end fitting that matches your anchor points. Use edge protectors where webbing crosses sharp corners.
Specifications explained
- Working load limit (WLL): 6,670 lbs — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
- Breaking strength: 20,000 lbs — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
- End fitting: Chain Extention — the hardware at the end of the strap or chain. Match it to your anchor points — flat hooks for flatbed rub rails, wire or snap hooks for D-rings, grab hooks for chain, E-track fittings for E-track.
- Chain grade: G70 — the strength class of the chain. Grade 70 is the standard for cargo securement; Grade 80, 100 and 120 alloy chains are stronger for their size and are the grades used for overhead lifting.
- Length: 2-1/2 Ft — make sure the strap reaches over the load and back to the anchor with enough tail to tension properly.
- Material: Polyester — Polyester webbing has low stretch, holds tension well and resists UV and moisture — the standard for tie-down and lifting straps.
Safety and care
- Inspect webbing before each use and retire straps with cuts, burns, melted fibres or damaged hardware.
- Keep the ratchet handle closed and locked after tensioning, and re-check tension at your first stop.
- Never exceed the working load limit printed on the tag.
To complete your setup, many buyers also look at corner & edge protectors and e-track accessories — see the suggestions below.
