If you need gear for car haulers, rollbacks and wreckers, this 8 point tie down straps & kit is worth a look: working load limit wll 4,000 lbs, breaking strength bs 12,000 lbs and strap width 2 Inch. It is offered in 3 options by size. Current prices run from $11.99 to $15.39.
Key specifications
- Weight (Lbs): 2.13
- Working Load Limit (WLL): 4,000 lbs
- Breaking Strength (BS): 12,000 lbs
- Strap Width: 2 Inch
- Chain Size: 3/8″
Best for
- Car haulers, rollbacks and wreckers
- Securing vehicles by the tires or axles
- Roadside towing and vehicle recovery
Tip
Secure vehicles at four points and strap the tires or axles, not body panels, so the suspension can move without loosening the tie-down.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Typical uses
- Car haulers, rollbacks and wreckers
- Securing vehicles by the tires or axles
- Roadside towing and vehicle recovery
Options available
- Size: 2″ x 14′, 2″ x 21′, 2″ x 18′
There are 3 option combinations, priced from $11.99 to $15.39. The full table above lists every combination and its price.
How to choose the right 8 point tie down straps & kit
Choose the grade and size by the working load limit you need. Grade 70 is the transport standard; higher grades carry more for the same size. Make sure the hooks match your binders and anchor points.
Specifications explained
- Working load limit (WLL): 4,000 lbs — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
- Breaking strength: 12,000 lbs — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
- Strap width: 2 Inch — wider webbing generally carries a higher rating and spreads pressure over more of the load.
Before you buy
- Match chain size and grade to the binders and hooks you already use.
- Confirm the working load limit covers your share of the cargo weight.
- Measure the length needed to reach anchor points on both sides.
Safety and care
- Never knot a chain or use a chain with stretched, bent or cracked links.
- Use edge protection where chain crosses finished or sharp edges.
- Only use alloy (Grade 80/100) chain for overhead lifting.
To complete your setup, many buyers also look at ratchet chain binders, chain hooks and corner & edge protectors — see the suggestions below.
