This item from our 8 Point Tie Down Straps & Kit range is built for car haulers, rollbacks and wreckers, with size 2″ x 16″, working load limit wll 4,000 lbs and breaking strength bs 12,000 lbs. It is offered in 5 options by color. The current price is $4.49.
Key specifications
- Weight (Lbs): 0.31
- Size: 2″ x 16″
- Working Load Limit (WLL): 4,000 lbs
- Breaking Strength (BS): 12,000 lbs
- Strap Width: 2 Inch
- Strap Length: 16 Inch
Best for
- Car haulers, rollbacks and wreckers
- Securing vehicles by the tires or axles
- Roadside towing and vehicle recovery
Tip
Secure vehicles at four points and strap the tires or axles, not body panels, so the suspension can move without loosening the tie-down.
How buying works
Global Cargo Control lists products and prices to help you compare. Use the buy button to open the product on the retailer’s website, choose your exact option, and check out there — the retailer ships and supports your order. Prices shown in US dollars were last checked on November 7, 2026; the final price may vary.
Typical uses
- Car haulers, rollbacks and wreckers
- Securing vehicles by the tires or axles
- Roadside towing and vehicle recovery
Options available
- Color: Black, Blue, Yellow, Red, Safety Green
There are 5 option combinations, priced from $4.49 to $4.49. The full table above lists every combination and its price.
How to choose the right 8 point tie down straps & kit
Pick the width and rating first: add up the WLL of every strap so the total is at least half the cargo weight, then choose an end fitting that matches your anchor points. Use edge protectors where webbing crosses sharp corners.
Specifications explained
- Working load limit (WLL): 4,000 lbs — the maximum load the item is rated to carry in normal service. For cargo securement, the WLLs of all tie-downs on a load must add up to at least half the cargo weight (FMCSA 49 CFR 393.106).
- Breaking strength: 12,000 lbs — the force at which the item fails in testing. It is not a working rating — always plan with the WLL, which is set well below breaking strength.
- Strap width: 2 Inch — wider webbing generally carries a higher rating and spreads pressure over more of the load.
- Length: 16 Inch — make sure the strap reaches over the load and back to the anchor with enough tail to tension properly.
Before you buy
- Add up the working load limits of all tie-downs against the cargo weight.
- Check that the end fitting matches the anchor points on your trailer.
- Make sure the length reaches over the load with tail left to tension.
Safety and care
- Inspect webbing before each use and retire straps with cuts, burns, melted fibres or damaged hardware.
- Keep the ratchet handle closed and locked after tensioning, and re-check tension at your first stop.
- Never exceed the working load limit printed on the tag.
To complete your setup, many buyers also look at corner & edge protectors, e-track accessories and ratchet tie down straps — see the suggestions below.
